PLAYBACK INFORMATION
•
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded
properly,
nF dISC
is displayed. In that case, use FINALIZE on your CD-
recorder to complete the recording.
• If you want to play a CD-Rewritable (CD-RW), it takes 3–15 seconds for sound
reproduction to start once you have pressed
2;
.
• Playback will stop if you open the CD lid.
• While the CD is being read,
1 -:-
flashes in the display.
VOLUME AND BASS
Volume adjustment
Adjust the volume by using VOL
E
.
Bass adjustment
• Press BASS to switch the bass enhancement on or off
y
is shown if the bass enhancement is
activated.
PROGRAM
MODE
PROGRAMMING TRACK NUMBERS
You can select up to 15 tracks to play in a program.
A single track may be played more than once in
the program.
1
While playback is stopped, select a track with
∞
or
§
.
2
Press PROGRAM to store the track.
y
PROGRAM
lights; the track number
programmed and
P
, with the total number of
stored tracks, are displayed.
3
Select and store all desired tracks in this way.
4
Press
2;
to start playback of your selected tracks.
y
PROGRAM
is shown and playback starts.
• You can review the program by pressing PROGRAM
for more than 2 seconds.
y
The display shows all stored tracks in sequence.
Notes: – If you press
PROGRAM
and no track is selected,
SELECt
is displayed.
– If you try to store more than 15 tracks,
FULL
is displayed.
Clearing the program
• While playback is stopped, press
9
to clear program.
y
CLEAr
is displayed once,
PROGRAM
disappears, and the program is cleared.
Notes: – The program also will be cleared if you
– interrupt the power supply, or
– open the CD compartment lid, or
– if the unit switches off automatically.
MODE
PROGRAM
p
/L
IN
E
OU
T
p
/L
IN
E
OU
T
p
/L
IN
E
OU
T
p
/L
IN
E
OU
T
PLAYING A CD
This CD player can play all kinds of
Audio Discs
such as
CD-Recordables and CD-Rewritables. Do not try to play a
CD-ROM, CDi, VCD, DVD or computer CD.
1
Push OPEN
2
to open the CD compartment lid.
2
Insert an audio CD, printed side up, by pressing the
CD center onto the hub.
3
Close the player by pressing the lid down.
4
Press
2;
to switch the player on and start
CD playback.
y
The current track number and the elapsed
playing time are displayed.
• You can pause playback by pressing
2;
.
y
The time where playback was paused will flash.
• You can continue playback by pressing
2;
again.
5
Press
9
to stop playback.
y
The total number of tracks and the total playing
time of the CD are displayed.
6
Press
9
again to switch off the player.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the unit will automatically
switch off after a while to save energy.
0
MODE
SELECTING A TRACK AND SEARCHING
Selecting a track during playback
• Briefly press
∞
or
§
once or several times to skip
to the beginning of the current, previous or next track.
y
Playback continues with the selected track, and
its number is displayed.
Selecting a track when playback is stopped
1
Briefly press
∞
or
§
once or several times.
y
The selected track number is displayed.
2
Press
2;
to start CD play.
y
Playback starts with the selected track.
Searching for a passage during playback
1
Keep
∞
or
§
pressed to find a particular passage in
a backward or forward direction.
y
Searching is started and playback continues at
low volume. After 2 seconds the search speed increases.
2
Release the button when you reach the desired passage.
y
Normal playback continues from this position.
Notes: – During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT
or while playing a program, searching is only
possible within the particular track.
PROGRAM
MODE
Both the model number and production number are located on the
bottom of the set.