9
English
2
Put the bottle onto the pump
body and turn it anticlockwise
to fix it. Do not over-tighten
when assembling the bottle to
the pump body.
3
Insert the Massage Cushion
into the pump funnel and press
the rim to ensure a perfect seal.
4
Put the silicone diaphragm onto
the pump body and press the
rim to make sure a perfect seal.
Tip
•
You may find it easier to
assemble while it is wet.
4 Assembling
To assemble the pump, follow the
steps below.
Note
•
Make sure that you clean and
sterilise the pump as instructed
in this user manual.
•
Make sure that you assemble
the pump correctly as instructed
in this user manual.
•
To avoid leakage, remove the
residue around the rim before
assembling. Put the bottle onto
the pump body, and do not
over-tighten.
•
Wash your hand thoroughly
before you take sterilised
components.
1
Insert the valve into the pump
body from underneath.
