Step 3: Connect the AurAir and Philips
to each other
1. On the AurAir meter, press the settings button (the small wheel) twice to see the QR code for the
AurAir web dashboard. Scan the QR code with your phone and click the link to see the dashboard.
2. On the AurAir dashboard you see the meter data and you change your meters settings. To connect
the AurAir and the Philips:
3. Choose the settings icon (the small white wheel) to get to the next screen
4. Choose the network icon to get to the AurAir-Philips connection screen
5. The
first two sliders should be set on green, and press ‘send’ (= ‘verzenden’)
. The bottom slider will
say “
searching
”, and after a minute display the name of the purifier you want to connect to this
AurAir meter. Put that slider on green and press send. If you see more purifiers (if you are installing
multiple machine in a building) keep the other purifiers you see on red.
6. Test the connection by breathing on the meter until it turns yellow or red, the Philips cleaner must
now start automatically working in a higher mode.
Step 4:
Troubleshooting the connection
1. Check if both products are still connected to your Wi-Fi (both should display the Wi-Fi icon in
white). When needed do a hard reset on each products by disconnecting it from the power source
for 30 seconds. Both products are designed to recover their connection to Wi-Fi and to each other.
2. Check, using the QR code, if the AurAir still sees the Philips. (The QR code appears after pressing
the settings button twice). On the portal 1st screen click the wheel on the left, 2nd screen click the
men bottom-left, 3rd screen has 3 sliders, make them all green, press send.
3. In case the connection cannot be established you can use the Philips in Automatic mode. The
Philips will still work. You can also operate the air purifier using the app on your phone.
