12
EN
,>((,(
Clean the cabinet
%
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
%
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
%
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
%
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
+# +$ " >
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
7 Troubleshooting
Warning
%
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
# (;<
unsolved, go to the Philips web site
&"""<><- )<+
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
%
Make sure that the power cord is
connected securely.
%
Make sure that there is power at the wall
outlet.
No sound
Adjust the volume.
Ensure that the track played is of a
compatible format.
> ),.< (:(>()).!
,>(,(.),>(:J(
%
Disconnect the AC power cord.
%
Connect the AC power cord after a few
seconds.
Cannot play disc
Ensure that the disc label is inserted with
the printed side facing up.
" (
the centre to the edge in a straight line.
This disc may be defective. Play another disc.
Z[Z[-
CD-R/CD-RW.
Ensure that the laser lens is clean.
Ensure that the CD is not encoded with
copyright protection technologies.
The CD skips tracks
Ensure that the CD is not damaged or dirty.
(-=
deactivated.
