Philips AJB7038D, Руководство пользователя

Страница: 12 / 16

12
EN
7 Other features
Set alarm timer
Set alarm
Note
•
Make sure that you have set the clock correctly.
•
You cannot set alarm in standby mode.
You can set two alarms.
1
Press and hold
AL1
/
AL2
for 3 seconds to
activate alarm setting mode.
2
Press SELECT to confirm.
»
The hour digits and alarm icon begin
to blink.
3
Press / repeatedly to set the hour.
4
Press
SELECT
to confirm.
Repeat steps 3-4 to set the minute, select an
alarm source, and volume.
» When alarm time comes, the selected
buzzer, DAB radio, FM radio, or iPod/
iPhone turns on.
Tip
•
If iPod/iPhone is selected, but no iPod/iPhone is
connected, the device switches to buzzer source
instead.
Activate/deactivate alarm timer
Press AL1 / AL2 repeatedly to activate or
deactivate the alarm timer.
»
or is displayed if alarm timer is
on and disappears if it is off.
• To stop the ringing alarm, press the
corresponding
AL1
/
AL2
.
Snooze alarm
When alarm sounds, press SNOOZE
repeatedly to choose the snooze time.
• 5 minutes
• 10 minutes
• 15 minutes
» The alarm snoozes and repeats ringing
5/10/15 minutes later if set.
Set sleep timer
This device can switch to standby mode
automatically after a preset period.
Press
SLEEP
repeatedly to select the sleep
timer period (in minutes).
»
When the sleep timer is activated,
is displayed.
To deactivate the sleep timer, press SLEEP
repeatedly until [Sleep off] (sleep off) is
displayed.
Play from an external device
You can also listen to an external audio device
through this device.
1
Press
SOURCE
to select the MP3 Link
mode.
2
Connect the MP3 link cable (not supplied)
to:
• the MP3-LINK socket (3 5mm) at the
back of the device.
• the headphone socket of an external
device.
3
Start to play the device (see the user
manual of the device).
LINE IN