Philips AJ7041D, Руководство пользователя

Страница: 12 / 16

13
English
EN
6 Other features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
Make sure that you have set the clock correctly.
1
Press and hold AL1 / AL2 for two seconds to
activate alarm setting mode.
»
The hour and minute digits begin to
blink.
2
Press / and / repeatedly to set
the hour and minute.
3 Press AL1 / AL2
Select alarm source
Note
For alarm sound, you can select buzzer, your last
listened radio chanel, or latest played audio in your
iPod/iPhone.
Adjust AL1/AL2 RADIO·BUZZ·DOCK control
to select alarm source for both alarms.
Tip
When alarm time comes, the selected radio, buzzer, or
iPod/iPhone turns on.
If iPhone is selected as alarm source, while no iPod/
iPhone is connected, the clock radio switches to buzzer
source instead.
Activate/deactivate alarm timer
1
Press AL1 / AL2 to view alarm settings.
2 Press AL1 / AL2 again to activate or deactivate
the alarm timer.
»
The alarm icon appears if alarm timer
is on and disappears if it is off.
To stop the ringing alarm, press the
corresponding AL1 / AL2 .
The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE .
»
The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep timer
»
When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF]
Play audio from an external device
You can listen to audio from an external device
through this clock radio.
1
Connect the MP3 link cable to:
the MP3 LINK socket.
the headphone socket of an external
device.
2
Press MP3 LINK to select MP3 link source.
3
Start to play the external device (see the
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
15 30 60 90 120
OFF