Switching on FM radio
1
Press
ON•OFF
to power on the set.
➜
The LCD lights up.
2
Press
DAB•FM
to select FM mode if "FM" is
not displayed.
➜
Waveband and radio frequency are dis-
played (see
5
).
Tuning to radio stations
1
In FM mode, press
SCAN
until frequency
number starts running.
➜
The radio will auto tune to a station of
strong signal strength, and search will
stop.
2
To tune to a weak station, press
1
/
2
until
an optimum reception is found.
3
Repeat the steps above until you find the
desired station.
Helpful hints:
–
Befor pressing
SCAN
, you may first press
2
to select a scan up, or press
1
to select a
scan down.
Storing FM presets
You can store up to 10 FM stations on the 10
preset buttons each for easy access.
1
In FM mode, tune to your desired radio sta-
tion (Refer to "Tuning to radio stations").
2
Press and hold one of the
preset buttons
(1-5)
on the top of the set to store the pre-
set.
➜
"
Station Saved
" is displayed briefly on
the second line of the display, and the
stored preset number is displayed
(see
6
).
•
To save on
presets 6-10
, first press
SHIFT
,
then press and hold the desired preset but-
ton for 2 seconds.
Helpful hints:
–
If you have already saved a FM station in that
preset location, it will be overwritten by a
new station.
–
When you store FM stations, these do not
overwrite your FM presets.
Selecting a preset FM station
1
In FM mode, press a preset button on the
top of the set to select presets
1-5
.
•
To select one of presets
6-10
, first press
SHIFT
, then press the desired preset button.
FM Radio
Sleep
The DAB radio has a built-in sleep timer,
which enables the set to be automatically
switched off during radio playback after a set
period of time.
Setting and activating the sleep timer
1
Switch on DAB or FM radio.
2
Press and hold
SELECT
for 2 seconds to
enter the timer setting mode (See
8
).
3
Press
1
/
2
repeatedly to select your desired
timer option.
➜
The selections are toggled as follows
(5 minutes as a step):
90
=
85
=
70
=
65
=
60...
=
10
=
5
=
SLEEP OFF
4
Press
SELECT
to confirm the selection.
5
The set will be switched off at the selected
time.
To deactivate the sleep function
1
In the timer setting mode, press
1
/
2
repeat-
edly until "Sleep Off" is displayed.
2
Press
SELECT
to confirm the selection.
Safety & maintenance informa-
tion
•
Place the set on a flat, hard and stable surface
so that the system does not tilt.
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
•
The apparatus shall not be exposed to drip-
ping or splashing.
•
Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
•
Do not cover the ventilation openings with
items such as newspapers, table-cloths, cur-
tains, etc.
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
No naked flame sources, such as lighted can-
dles, should be placed on the apparatus.
•
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol, ammo-
nia, benzene or abrasives as these may harm
the housing.
SLEEP
Safety & Maintenance (See
9
)
