background image

SELECTING THE ALARM MODE

To use the alarm, you must set the alarm time first. You can choose from two
different alarm modes to wake you up: by radio or buzzer. 

1

Select your choice of alarm mode by adjusting 

RADIO / ALARM

to 

RADIO

or

BUZZER

.

The alarm indicator (AL) will light up.

Helpful Hint:

• If you have selected the radio mode, make sure you have adjusted the vol-

ume loud enough to wake you.

• The buzzer is set at a fixed volume and cannot be adjusted.

SWITCHING OFF THE ALARM

There are three ways of switching off the alarm. Unless you cancel the alarm
completely, the 

24 hour alarm reset option

will be automatically selected after

59 minutes, from the time your alarm time first goes off.

24 HOUR ALARM RESET

If you want the alarm mode to be stopped immediately but also wish to retain
the same alarm setting for the following day:
• Press 

ALARM RESET

during the alarm call.

The alarm indicator (AL) will remain on.

CANCELING THE ALARM COMPLETELY

To cancel the set alarm time before it goes off, or during the alarm call:
• Adjust 

RADIO / ALARM

to 

OFF

position. 

The alarm indicator (AL) will light off.

AJ3112_05_CCR_ENG  2008.3.7  10:35 AM  Page 7

Содержание AJ3122













Отзывы: