Philips AJ260, Руководство пользователя

Страница: 7 / 23

Sleep Weather forecast
Switching off the alarm
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the alarm
call at the same time for the following day:
1 During the alarm call, press once
SLEEP/ALARM RESET or RADIO
ON/OFF
.
Repeat alarm
This will repeat your alarm call at 9-minute
intervals.
1 During the alarm call, press
REPEAT ALARM/BRIGHTNESS
CONTROL
.
Switching off the alarm completely
Press once or more corresponding
ALM 1 or ALM 2 until disappears.
Sleep
The clock radio has a built-in sleep timer,
which enables the set to be automatically
switched off during radio playback after a set
period of time.
Setting the sleep time
1 During radio playback, set your timer by
pressing repeatedly
SLEEP until the desired
timer option appears.
➜
Selections are follows (time in minute)
10 = 20 = 30 = 60 = 90 = 120 = OFF =
10
2 The set will turn off automatically at the
selected time.
3 To cancel the timer function , either
press
SLEEP
once or more until “
OFF
”
appears, or press RADIO ON/OFF to
switch to standby.
➜
“SLEEP” disappears when sleep function is
cancelled.
Note:
– The sleep function does not affect your
alarm time setting(s).
Weather forecast
The unit is capable of detecting atmospheric
pressure changes. Based on the collected
data, it can predict the weather in the next 12
to 24 hours.The effective range covers an
area of approximately 30 to 50 km.
• Each weather forecast status will be displayed
with graphical animation and different lighting
colors at the top left hand corner of the unit,
see the figure below.
About color lighting
– Battery operation:The light turns on for 10
seconds after each atmospheric measure-
ment, or after any button pressed.
– AC operation:The light always turns on
when the power is switched on.To let the
light turn on just like the case of battery
operation mentioned above, press and hold
REPEAT ALARM/BRIGHTNESS
CONTROL
for about 10 seconds.
LCD display
Light
color
Sunny
Partly cloudy
Cloudy
Rainy
Stormy
Amber
Light blue
Blue
Purple
Red
Snow
White
AJ260_CCR 2007.8.17 14:04 Page 7