2
Always disconnect the mains adapter if you are not using the set.
Helpful hints:
To avoid damage to the set, use only the adapter supplied!
SETTING THE CLOCK
The clock uses 24-hour time format.
Important!
Pull out the plastic protective sheet to activate the clock backup battery
(CR2032). This battery is included and installed in the set.
Manual setting
1.
Press and hold
DATE/SET TIME
to enter the clock setting mode.
™
Year digits start flashing.
2.
Hold down or press
/-
repeatedly to set the current year.
3.
Press
DATE/SET TIME
to confirm.
™
Month digits start flashing.
4.
Hold down or press
/-
repeatedly to set the current month.
5.
Press
DATE/SET TIME
to confirm.
™
Date digits start flashing.
6.
Hold down or press
/-
repeatedly to set the current date.
7.
Press
DATE/SET TIME
to confirm.
™
Date and Month indicators, D and M, start flashing.
8.
Press
/-
repeatedly to set the desired date format.
9.
Press
DATE/SET TIME
to confirm.
™
Hour digits start flashing.
10.
Hold down or press
/-
repeatedly to set the current hour.
11.
Press
DATE/SET TIME
to confirm.
™
Minute digits start flashing.
12.
Hold down or press
/-
repeatedly to set the current minute.
