10
EN
Turning on and off
Note:
•
For optimum purification performance, close doors and windows.
•
Keep curtains away from the air inlet or air outlet�
•
Plug the appliance into the power outlet; do not use a power strip�
1
Plug the Air Performer into the power socket.
2
Touch to switch on the Air Performer.
»
The Air Performer beeps.
»
The “
” displays on the screen during warming
up. Then the Air Performer shows the PM2.5 level
after measuring the air quality.
3
Touch and hold the button for 3 seconds to switch off
the Air Performer.
Note: If the Air Performer stays connected to the electrical outlet after turning it OFF, the Air
Performer will operate under the previous settings when turned ON again�
Oscillation
Press the button to activate the oscillation feature in
your Air Performer, the appliance can oscillate at these
angles: 45°, 90°,180°, 270°, 350° and OFF.
»
The oscillation angle displays on the screen.
»
If no operation is performed within 3 seconds, the
appliance goes back to normal display.
Function switch
You can choose the Circulation (
) function, or Fan function ( ) by pressing
the button. You can adjust the fan speed manually; see section "
Setting fan
speed�
"
Circulation function (
):
It distributes diffused airflow for optimal
air circulation by opening the back outlet,
maximizing purification performance and
reducing cooling sensation. At higher speeds, a
soft current of airflow will blow harder through
the front outlet to increase cleaning power.
