Philips AE5000, Руководство пользователя, Страница: 6 / 43

Basic operation
1 Press POWER to power on the set.
➜
The LCD lights up.
2 Press SOURCE to select DAB or FM
mode.
➜
The radio will tune to a DAB station if
DAB mode is selected.
➜
The radio will tune to a FM station if FM
mode is selected.
3 To adjust volume, press /– .
4 To improve DAB/FM reception, extend and
turn the telescopic antenna. Reduce its
length if the signal is too strong.
•
To further improve DAB reception, you may
also perform manual tuning (See
Manual
Tune )
Helpful hints:
– If there is no DAB coverage currently avail-
able, or DAB signal is too weak, in your area,
no DAB station will be found, and information
like "No station available" will be displayed.
Dimming LCD brightness
1 Press and hold DISPLAY for 2 seconds to
switch Dim on or off.
➜
Auto dim on will be activated if dim
function is off in the last setting.
➜
Auto dim off will be activated if dim
function is on in the last setting.
2 If Dim function is activated and there is 15
seconds of button inactivity, the LCD bright-
ness will be decreased to save power.
Pressing any button will resume the original
LCD brightness.
Switching on DAB radio
For the first time when DAB mode is
switched on, AE5000 will perform an auto
scan (see
2 ).Then all the available DAB sta-
tions will be stored on the set, and the radio
will tune to the first available station.
1 Press POWER to power on the set.
➜
The LCD lights up.
2
Press
SOURCE
to select DAB mode if "FM"
is displayed.
➜
" Philips DAB & FM Radio " is displayed
briefly (see 3 ), then the radio auto tunes
to a station.
Changing DAB stations
1 In DAB mode, press
1
/
2
repeatedly until
your desired station name is displayed.
➜
The selected station name appears on
the second line of the display.
2 Press SELECT to confirm.
➜
The radio will immediately tune to the
selected station.
About station display symbols
You may see some symbols displayed before
the station names as follows:
? :The symbol indicates that the station is not
currently available, or not active.
>>
:This symbol indicates that the station is a
primary station with secondary service.
<< :This symbol indicates that the station is a
secondary station.
Basic Operation DAB Radio
AE5000_05_CCR_Eng/Nor/Dan 2007.9.19 16:28 Page 6