Philips ADD4952, Руководство пользователя

Страница: 8 / 11

5 Cleaning and maintenance
6 Trouble shooting
· To avoid accidents, turn off and unplug the water dispenser from the outlet before cleaning.
· A soft damp cloth may be used to clean the surface of the water dispenser. When necessary,
a mild detergent may be used. DO NOT use corrosive chemical solvents to clean the unit, as
this may damage the surface of the water dispenser.
· DO NOT pour water on the exterior of the unit to avoid getting the internal electrical system
wet . DO NOT immerse the unit in water when cleaning.
· The water bottle cap, hose, and drip tray may be washed in a dishwasher (top rack only).
· Keep the water dispenser 6 inches (15cm) away from the wall so it can work properly. Make
certain all ventilation openings are clear of obstruction.
· Do not damage the heating or cooling system, paying particular attention to the black
condenser or heating radiator on the back of the water dispenser.
· If you will not use the water dispenser for a long period of time, please unplug the power
cord and drain the water dispenser. Drain the water from all faucets, then remove the drain
plug on back and allow it to drain. Make certain the drain plug is fastened tightly when
finished.
Trouble Possible causes Solutions
1.Appliance is not connected to the
electrical system
2.The switch is not on
1.The water tank is broken
2.The water pipe is broken
3.The faucet is damaged
1.Heating switch is damaged or
not connected well
2.The heating tank is broken
3.The electrical connection is loose
1.Cooling switch is damaged or
makes no contact
2.The electrical connection is loose
1.Make sure that the switch is ON
and the plug is connected
2.Turn the switch into on
Lights do
not lit
Leaking
Not heating
Not cooling
Contact aftersales personnel for
support
Contact aftersales personnel for
support
Contact aftersales personnel for
support
5