Philips AC1211, Руководство пользователя

Страница: 14 / 66

Filter alert light
status Action
A3 displays on
the screen
For AC1215 : Replace
NanoProtect filter
HEPA Series 3
(
FY1410
)
For
AC1211
: Replace
NanoProtect filter
HEPA Series 1
(
FY1400 )
C7 displays on
the screen
For AC1215 : Replace
the NanoProtect filter
AC (
FY1413 )
A3 and C7
display on
the screen
alternately
For
AC1215
: Replace
both filters
1
Turn off the air purifier and unplug
from the wall outlet.
2
Take out the used air filter according
to the filter alert light status
displayed on the screen (Fig.
|
for
AC1215 , Fig.
}
for AC1211 ). Discard
used filter.
Note
•
Do not touch the pleated filter
surface, or smell the filter as it has
collected pollutants from the air.
3
Remove all packaging material from
the new filter (Fig.
g
for AC1215 ,
Fig.
h
for
AC1211
).
4
Place the new filters into the air
purifier (Fig.
i
for AC 1215 , Fig.
j
for
AC1211 ).
5
Put the plug of the air purifier in the
wall outlet.
6
Touch the for 3 seconds to reset
the filter lifetime counter (Fig.
~
).
7
Wash your hands after changing a
filter.
6 Replacing the
filter
Filter replacement
indicator
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen.
If the filters are not replaced in 14 days,
the air purifier will stop operating and
automatically lock.
Replacing the filters
Note
•
The air filters are not washable or
reusable.
• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
• Do not clean the filter with a
vacuum.
12 EN