ENGLISH
Trimmer: After Each Use
1
Press the on/off button to turn razor ON.
2
Rinse trimmer under hot tap water for at
least 30 seconds.
3
Turn razor OFF and shake off excess water.
4
Lubricate trimmer teeth twice a year with
one drop of mineral oil.
5
Remove trimmer and put it back into the
trimmer storage compartment on the
charging stand.
6
Replace Razor Head Assembly back on the
razor until it clicks into position.
Replacing Cartridges
◗
For hygienic reasons, it is recommended to
replace the shaving conditioner cartridge each
time you start a new Shaving Conditioner
bottle.
◗
A new empty cartridge is supplied with each
new NIVEA FOR MEN Shaving Conditioner
bottle (Model HS800).
26
ENGLISH
Shaving Conditioner Cartridge
C
1
Remove the shaving conditioner cartridge
from the back of razor.
C
2
Insert the hinge at the top of the new
shaving conditioner cartridge into the slot
in the rim of the razor back (
1
). Then
press the bottom part of the cartridge
with your thumb (2) to attach the
cartridge to the razor. You will hear a
‘click’.
3
The shaving conditioner cartridge is
now ready to be filled (see ‘Filling Razor
Cartridge’ section).
Replacing Razor Head Assembly
◗
Replace entire Razor Head Assembly once
a year for optimal shaving results.
◗
Replace damaged or worn Razor Head
Assembly with model HS85 Philips Norelco
razor heads only.
C
1
Remove Razor Head Assembly from razor
by pulling Razor Head Assembly straight
up away from the razor.
27
