ENGLISH
19
19
Battery Removal
C
◗
This Philips Norelco razor contains a
rechargeable Nickel Metal Hydride battery
which must be disposed of properly.
◗
Battery should only be removed when
razor is to be discarded.
◗
For assistance, visit our website,
www.philips.com/support or call toll free:
1-800-243-3050.
1
Turn razor ON.
2
Allow razor to run until the battery is
empty/depleted.
3
Turn razor OFF.
4
Use a screwdriver to remove the screws
in the back of the razor and open it.
5
Cut the battery strips with a cutter and
pull the battery loose from the glued strip.
Be careful, the battery strips are very sharp.
6
Remove the rechargeable battery.
7
Do not attempt to replace battery.
Insulate battery ends by covering with tape
and/or place battery in a small plastic bag.
8
Discard your razor. Do not attempt to
plug power cord into the outlet or
recharge the razor after the battery has
been removed.
12_6955XL_6947XL_6945XL_Nov.indd 19
11/29/12 2:23 PM
