background image

72

PROJECTION TELEVISION

One Year Free Labor

One Year Free Service on Parts

Two Years Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen

This product can be repaired in-home.

This warranty gives you specific legal rights.  You may have other rights which vary from state/province to state/province.

Philips Consumer Electronics, P.O. Box 520890, Miami, FL 33152, (402) 536-4171

L

IMITED

W

ARRANTY

Limited Warranty

WHO IS COVERED?

You must have proof of purchase to receive warranty service.  A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product. for one year
thereafter (30 days for the projection TV screen), all parts will be
repaired or replaced, and labor and transportation are free. From one to
two years from the day of purchase, you pay for the replacement or
repair of all parts except the cathode ray tube and the “Clear-Vu” lens,
and for all labor and transportation charges. After two years from the
day of purchase, you pay for the replacement or repair of all parts except
the “Clear-Vu” lens (which is guaranteed against manufacturer’s defects
for the life of the product), and for all labor and transportation charges.

All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.

product repair and/or part replacement because of  misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.

reception problems caused by signal conditions or cable or antenna
systems outside the unit.

a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.

incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)

a product used for commercial or institutional purposes.

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company.  In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).

MAKE SURE YOU KEEP...

Please keep your sales receipt or other document showing proof of
purchase.  Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.

TO GET WARRANTY SERVICE...

Repair must be performed by an authorized service center or a factory
service center. If you do not live near a factory service center, contact
your dealer.  If your dealer is an authorized service center, he will
arrange repair.  If your dealer is not an authorized service center, he
will direct you to the authorized service center engaged by him to
service the products he sells.

(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty.  But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)

(In Canada, this warranty is given in lieu of all other warranties.  No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose.  Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)

IF YOU HAVE QUESTIONS...

Please contact Philips at:

1-800-661-6162, if calling from Canada (French Speaking)

1-800-531-0039, if calling from Canada (English or Spanish Speaking)

1-800-531-0039, if calling from the USA (English or Spanish Speaking).

REMEMBER...

Please record the model and serial numbers found on the product
below.  Also, please fill out and mail your warranty registration card
promptly.  It will be easier for us to notify you if necessary.

MODEL # ________________________________________________

SERIAL #

________________________________________________

EL4945E005 / 2-02

Содержание 55PP950299









































































Отзывы: