19
Advanced
Language
English
Chinese
HDMI Version
HDMI1.4
Available only
50BDL311Q/55BDL3110Q/65BDL3110Q
HDMI2.0
Power On Mode
Power On
Standby
Last Status
Boot On Source
Switch
On/Off
Source
Last Status/
VGA(32BDL3110Q/43BDL3110X)
/HDMI1/HDMI2/CMS/PDF/MEDIA/
CUSTOMER
1. When SCHEDULE is set with startup time, but
the startup time has not arrived yet, boot the
device according to the signal source set in the
“Boot On Source”.
2. If the source is set in USB, the booting page is
the “U disc homepage”.
Boot Wake
UART Wake
On/Off
When UART wake = On
，
RC off or power
saving can both be waken up by UART wake.
HDMI Wake
On/Off
When HDMI Wake = On, and the current source
is HDMI1/2, power saving and the current HDMI
source are waken up with signals.
RS322 Control
On/Off
Pixel Shift
On/Off
Uplayer Setting
Switch
On/Off
1.When Uplayer Setting switch on, Boot On
Source is grayed, the setting is unavailable.
2.Supported file name
：
Philips_UPlay
3. To play content in Philips_UPlay, the system will
cut the signal source to USB, and stay at the USB
source when plugging and unplugging the USB
flash drive.
4. Pivot jump to Philips_UPlay when booting, the
priority is higher than the source specified by the
schedule boot
Repeat Time
8s/16s/24s/32s
Supported file type
：
1
、
Photo: ".png", ".jpg"
2
、
Video: ".dat", ".vob", ".ts", ".mkv", ".mov", ".3gp",
".flv", ".webm", ".wmv", ".asf", ".mp4", ".avi", ".mpg".
Restore
Restore Default
Cancel/OK
System Reset
Notes: To wake up
PD
in the
HDMI
source, you can set
HDMI
wakeup
“On”
.
This product supports timed shutdown and timed startup functions. Refer to the “Shutdown time/Startup time” in the upper table for details.
