background image

Limited Warranty (cont’d)  63

If your product is defective, you may be able to exchange it at the store from which it was purchased. 
Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to exchange
a product with them. After the store’s return period has expired, or if the store does not have an exchange pro-
gram, you may exchange the product with Philips if you have your original sales receipt.
To exchange your product with Philips (per the warranty conditions stated previously), remember:

If you exchange the product within 90 days of the original purchase, there is no cost to you. 

If you exchange the product more than 90 days after but less than one year after the day of original purchase,
your cost will be $29.95 plus your local sales tax. If sales tax is missing or incorrect, your order will be delayed,
and you will be contacted. 

After 12 months from the day of original purchase, contact Philips Service Solutions Group (PSSG) at 1-800-531-
0039 for information regarding out-of-warranty exchange.

If you do not have your original sales receipt, or if you have any questions, call PSSG at 1-800-531-0039.

To obtain a replacement product from Philips:
1. 
Complete the Exchange Form below.
2. Pack the product and its accessories (remote control, rf coaxial cable, owner’s manual, and car battery cord, if

applicable) in the original box or a suitable alternative. You will receive replacement accessories with your
replacement product. For packing details, call 1-800-531-0039. 

3. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into an

envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.

4. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight pre-

paid, to:

Philips Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso, TX   79928
ATTENTION:  VCR EXCHANGE

A replacement will be sent to you via UPS within 48 business hours of Philips’ receipt of the product.

EXCHANGE INSTRUCTIONS

EXCHANGE FORM

Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):
Name:
Street Address:

Apt. #:

City:

State/Province:

Zip Code/Postal Code:

Phone (day):

Phone (night):

Payment Amount:   $29.95   + Sales Tax  

=  Total  

Method of Payment: (Check one. Please, no cash or CODs.)
_____

Check/Money order

Check/Money order number 

Account number

Expiration date

_____

American Express

___________________________

__________

_____

Visa

___________________________

__________

_____

Novus/Discover

___________________________

__________

_____

Mastercard

___________________________

__________

Signature: _____________________________________________________________

Detailed reason for return, use additional paper if necessary: _____________________________________________

_______________________________________________________________________________________________
Model Number  

Serial Number  

Remember, the return box should include the following:

The product, 

Completed Exchange Form and sales receipt, 

Accessories supplied with the product, and

Payment, if applicable.

Содержание 4HD-HIFI-CLOCK FUNCT VCR W-VCR-VR674CAT99


































































Отзывы: