6.5
Digital reception test
If you receive Digital TV broadcasting you can verify
the quality and signal strength of a specific channel.
‡
Select a channel.
®
Press
Menu
.
Ò
Select Setup > Installation > Channel
installation >
Digital:Test reception
.
†
Press
π
to enter
º
Press
OK
.
◊
Press the green key to start the test.
Information on the quality and the signal
strength of this channel is shown.
‹
Use the cursor keys to change the frequency to
improve the signal or enter a new frequency
directly with the digit keys.
≈
Press the green key to store the frequency if
the signal quality and strength are good.
Ú
Press the red key to return to the Channel
installation menu.
œ
Press
Menu
to quit the menu.
à
Tip
To achieve the best results, contact a specialised
antenna installer.
6.6
Factory settings
You might want to return to the original factory
settings. Only picture, sound and Ambilight settings
will be reset.
‡
Press
Menu
.
®
Select Setup > Installation >
Factory settings
.
Ò
Press
π
to enter the Factory settings menu.
†
Press
OK
.
º
Press
Menu
to quit the menu.
30
Channel installation
2721.3 EN 23-06-2008 15:15 Pagina 30