Philips 47PFL5704D/F7, Руководство по обслуживанию

Страница: 25 / 72

8-1 A9PH1TR
TROUBLESHOOTING
7116 Pin(1,14) 12V
7116 Pin(12) 1.2V
7117 Pin(1,14) 12V
7117 Pin(12) 3.3V
No work (LED is off)
No raster (picture too dim)
FLOW CHART NO.1
FLOW CHART NO.2
IS 3.3V voltage supplied to Pin(3,5) of 1C02 on the
SSB?
Check Module IR.
Yes
Yes
No
Yes
Check if power switch is normal. Replace Power switch.
Replace Power Supply Module.
No
Yes
IS 3.3V voltage supplied to Pin(1) of 1M95 on the
SSB?
No
Replace Power Supply Module.
Replace Power Supply Module.
No
Replace SSB.
Replace SSB.
Yes
Check if clock source 1E07.
Is 12V voltage supplied to Pin(1,2) of 1M99 and
Pin(6,7,8,9,11) of 1M95 on the SSB?
No picture
FLOW CHART NO.3
Is 3.3V voltage supplied to Pin(1) of 1M95 on the
SSB?
No
Replace 1E07.
No
Yes
Check if RGB, clk, H/V and DE signal output 128 bit
TTL.
Try to replace Flash Rom.
No
Yes
Check line filter on LVDS signal line.
Yes
Replace LVDS cable.
Replace bad line filter.
No
Check the circuit around each regulator and
eliminate short and open situation.
No
Yes
Check if working voltage each pin of 7116 and each
pin of 7117 on the SSB.