7
Channels
7.1
About Channels and Switch
Channels
To watch TV channels
• Press
. The TV tunes to the TV channel you last
watched.
• Press
(Home)
>
Channels
and press
OK
.
• Press
+
or
-
to switch channels.
• If you know the channel number, type in the number
with the number keys. Press
OK
after you entered
the number to switch channels.
• To switch back to the previously tuned channel,
press
BACK
.
To switch to a channel from a channel list
• While watching a TV channel, press
LIST
to
open the channel lists.
• The channel list can have several pages with
channels. To view the next or previous page,
press
+
or
-
.
• To close the channel lists without switching
channels, press
LIST
again.
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a
(star).
If you lock a channel, it will be marked with
a
(lock).
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
This TV can receive digital television standard DVB. TV
may not work properly with some operators of digital
television , non-compliance with requirements of the
standard in full.
7.2
Install Channel
Antenna and Cable
Manually Search for Channels and Channel Settings
Search for Channels
Update existing channel list
(Home)
>
Settings
>
Antenna/cable
installlation
>
Search for channels
>
Update
channels
Re-install all channels
(Home)
>
Settings
>
Antenna/cable
installlation
>
Search for channels
>
Reinstall
channels
1 -
Select the country where you are now and
press
OK
.
2 -
Select
Antenna
(DVB-T)
or
Cable (DVB-C)
,
and select one item you need to re-install.
3 -
Select
Digital and analogue channels
,
Only
digital channels
, or
Only analogue channels
.
4 -
Select
Start
and press
OK
to update channels.
This can take a few minutes.
Channel Settings
(Home)
>
Settings
>
Antenna/cable
installlation
>
Search for channels
>
Reinstall
channels
1 -
Select the country where you are now and
press
OK
.
2 -
Select
Antenna
(DVB-T)
or
Cable (DVB-C)
,
and select one item you need to re-install.
3 -
Select
Digital and analogue channels
,
Only
digital channels
, or
Only analogue channels
.
4 -
Select
Settings
and press
OK
.
5 -
Press
Reset
to reset, or press
Done
when
complete the settings.
Frequency scan
Select the method of searching for channels.
•
Quick
: select the faster method and use the
predefined settings used by most cable providers in
your country.
•
Full
: If this results in having no channels installed or
if some channels are missing, you can select the
extended
Full
method. This method will take more
time to search for and install channels.
•
Advanced
: If you received a specific network
frequency value to search for channels,
select
Advanced
.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz
. Using the 1MHz steps will take more
time to search for and install channels.
Network frequency mode
If you intend to use the fast
Quick
method
in
Frequency scan
to search for channels,
select
Automatic
. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select
Manual
.
17
Содержание 43PUS6262
Страница 66: ...Powered by TCPDF www tcpdf org 66 ...
