Philips 43PFT6100S/67, Руководство по обслуживанию

Страница: 43 / 54

If there is no showing of [ Device Type eMMC ] upgrade cannot be conducted , please check the programming board is
properly connected and if main board can boot (main board can boot normally not display [ Device Type eMMC ,] need to
upgrade the software, copying it into U disk, press and hold the button panel VOL + button first and powering on main
board, wait for LED indicator on the machine flashes for about five seconds and then unplug the U disk and re- power
main board to display ) .
7. Check "Auto" icon in the menu settings are consistent with the figure below, and then click "Run" button to boot file to
program.
Click
“
Connet
”
button under tool bar, running
program top part will show
【
Device Type eMMC
】
After click
“
Stop/Run
”
button
，
if interface lower right corner
shows
“
Connecting.....
”
and tab
bar shows as
“【
Device Type
eMMC
】 “
means connecting is
failed or current main board can
only us U disk to upgrade.
42