EN 17
Note
Some apps support only mouse operation.
The memory space is not equal to
available space.
Philips reserves the right to add or delete
some apps.
Do not change the ROM of TV at random.
Otherwise, any faults caused thereof are
not within the warranty scope.
Network Type
You can select network setting type.
Press
key and then select Connection >
Wired or Wi-Fi.To view MAC address, press
key and then select Connection >
Wired or Wi-Fi > View Network Settings.
Cable Installation
To needing to connect the TV to PC network or
Internet, you need to install a route in the PC
network. Use a network cable (Ethernet cable)
to connect the route to the TV.
Connect the route to the network interface at
the bottom of TV using a network cable, and
turn on the route before network installation.
Wired Network Connection and
Automatic Searching
1. Press
key and then select Connection >
Wired or Wi-Fi > Connect Network >
Wired Network.
2. Select
DHCP
and then Connect and press
OK
key.The network protocol will be set
automatically.
Wired Network Setting - Manual Input
1. Press
key and then select Connection >
Wired or Wi-Fi > Connect Network >
Wired Network.
2. Select static IP, press
key, and place the
cursor in the input box.
3. Use the remote control to input IP address,
subnet mask, gateway, DNS1 and DNS2.
4. Upon input completion, select OK and then
press
OK
key.
Wireless Network Installation
1. Press
key and then select Connection >
Wired or Wi-Fi > Connect Network >
Wireless Network.
2. Select ON.The screen will show the current
set network parameters and available
wireless network.
3. Select Connect WPS, turn on the WPS
function of the router, and press
OK
key to
connect WPS network.
Screen Sharing
Multi-screen Interaction shows the contents on
the mobile device screen on the TV screen and
plays the sound on the mobile device in the TV
speakers synchronously. Use the volume button
on the remote control to control volume.
Note
The multi-screen interaction function may
not be compatible with some mobile
devices.
Create Connection
1. Press
key and then select Connection >
Wired or Wi-Fi > Screen Sharing.
2. Select ON or OFF and then press
OK
key
to confirm.
3. Use the WLAN/wireless display function on
the mobile device to send a connection
request.When it is connected successfully,
the picture on the mobile device will be