Philips 43PFS4131, Руководство пользователя, Страница: 39 / 63

during the countdown.
3. Press

(left) repeatedly if necessary, to close the
menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1. Press

, select Eco settings and press

(right)
to enter the menu.
2. Select
Switch off timer and press OK .
3. Press the arrows

(up) or

(down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press

(left) repeatedly if necessary, to close the
menu.
EasyLink
EasyLink
To switch off EasyLink completely…
1. Press

, select General settings and
press

(right) to enter the menu.
2. Select EasyLink , press

(right) and
select EasyLink one step further.
3. Select Off .
4. Press

(left) repeatedly if necessary, to close the
menu.
EasyLink remote control
To switch off EasyLink remote control…
1. Press

, select General settings and
press

(right) to enter the menu.
2. Select EasyLink > Easylink remote control , and
press OK .
3. Select Off .
4. Press

(left) repeatedly if necessary, to close the
menu.
Location
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner.
Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location…
1. Press

, select General settings and
press

(right) to enter the menu.
2. Select Location > Shop , and press OK .
3. Press

(left) repeatedly if necessary, to close the
menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Shop , you can set the availablility of
a specific demo for in store use.
1. Press

, select General settings and
press

(right) to enter the menu.
2. Select Commercial banner and press

(right) to
enter the menu.
3. Select On or Off.
4. Press

(left) repeatedly if necessary, to close the
menu.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1. Press

, select General settings and
press

(right) to enter the menu.
2. Select Factory settings and press OK.
3. Press

(left) repeatedly if necessary, to close the
menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1. Press

, select General settings and
select Reinstall TV .
2. Follow the instructions on screen. The installation
may take a few minutes.
39