BDS
Mirror TV Application Note
Release v0.5
Important points to observe when changing decorative frames
1. It is strongly recommended that this operation be conducted in a dust-free
environment. This will help to ensure the continued quality of the Mirror TV display
after the new custom frame has been attached.
2. The design of the new decorative frame must conform to certain dimension guidelines
to ensure that it will attach securely to the steel mounting frame of the Mirror TV. For
the dimensions, refer to the sections
Custom Decorative Frame Profile
and
mounting Frame
Dimensions for Mirror TV
later in this document.
3. Any new custom decorative frame should conform to the following guidelines:
a. The new custom decorative frame should provide a hole to be able to place the
plastic Infrared receiver (located at the lower right portion of the Mirror TV
original décor frame) as this could interfere with the performance of the Mirror
TV Remote Control.
4. The same decorative frames can be be re-used multiple times, as the clicking device on
the mounting frame is suitable for multiple usage. Any changes to the Mirror TV,
including the replacement of the decorative frames, is performed at the customer’s own
risk. Therefore it is strongly recommended that the services of a professional installer
be used to make these changes.
Directions on changing the Mirror TV decorative frames
To replace the existing decorative frame with a new frame, follow these directions:
1. At the beginning the Mirror TV will hang on the wall
Copyright © Philips BDS-ITV 2005
6
