Philips 42PFL86 6D Series, Руководство пользователя

Страница: 20 / 73

EN 20
Stop 3D
If you switch to another channel or a
connected device, the TV switches back to
2D.
To stop watching 3D during a 3D program,
press ADJUST . Select [2D/3D] > [2D],
then press
OK
. This forced 2D picture
shows only the 3D-left picture.
Note:
The 2D/3D menu is only available
when the TV receives 3D content from the
input signal, or when
[3D format]
has been
set to [3D - Side by side] or [3D - Top /
bottom] .
Optimal 3D viewing
For an optimal 3D viewing experience, we
recommend that you:

sit at a distance that is at least three
times the width (W) of the TV screen.
Do not sit more than six meters away.

view the center of the TV screen at
your eye level.

watch the TV away from direct sunlight
as it may interfere with the 3D
experience.
Ambilight
What you can do
*Available on certain models only.
Ambilight gives a more relaxed viewing
experience. It automatically adjusts the color
and brightness of the light to match the TV
picture.
What you need

For the best Ambilight effect, position
the TV 25 cm away from the wall.

Keep the remote control away from
the TV, as it can interfere with the
infrared signals.

Dim the light in the room.