Philips 42PFL5556/V7, Руководство пользователя

Страница: 30 / 34

28 EN
Sound issues
There is a picture but sound quality is poor:
Note
•
If no audio signal is detected, the TV
automatically switches the audio output off —
this does not indicate malfunction.
• Check that all cables are properly connected.
• Check that the volume is not set to 0.
• Check that the sound is not muted.
There is a picture but the sound quality is poor:
•
Check that the sound settings are correctly
set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the centre.
HDMI connection issues
There are problems with HDMI devices:
• Note that HDCP (High-bandwidth Digital
Content Protection) support can delay the
time taken for a TV to display content from a
HDMI device.
•
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound disruptions,
check that output settings from the HDMI
device are correct.
•
If you use an HDMI-to-DVI adapter or
HDMI-to-DVI cable, check that an additional
audio cable is connected to
AUDIO IN
(mini-
jack only).
Computer connection issues
The computer display on the TV is not stable:
•
Check that your PC uses the supported
resolution and refresh rate.
•
Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to the
FAQs for this product at www.philips.com/support.
If the problem remains unresolved, contact Philips
Consumer Care in your country as listed in the
Addendum.
Warning
•
Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
•
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.