Philips 42PFK6309, Руководство пользователя

Страница: 73 / 96

2 - Press  and select Setup and press OK .
3 - Select
TV settings
>
Ambilight
>
Amhue
and press
OK .
4 - Select Amhue one step further, select On and press
OK .
5 - Select
Configure Amhue
and press
OK
.
If the TV is connected to your home network, it will start
looking for the Philips Hue Bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.
With the TV connected to your network, go to page
Hue
Bridge .
For more info on connecting the TV to your home network,
press
 Keywords and look up Network, wireless .
Hue Bridge
In the following step, you will link up the TV with the Philips
Hue Bridge .
The TV can only be linked up to one Hue Bridge.
To link the Hue Bridge…
1 - With the TV connected to the network, it will show the
available Hue Bridges. If the TV did not find your Hue Bridge yet,
you can select
Scan again and press OK .
If the TV found the only Hue Bridge you have, select Next and
press OK .
If you have more than one Hue Bridge available, press  (up) or

(down) to select the Hue Bridge you want to use and then
select Next and press OK .
2 - After you pressed OK , go to the Philips Hue Bridge and
press the link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30 seconds. The TV
will confirm if a Hue Bridge is linked to the TV.
3 - On this confirmation, select OK and press OK .
With the Philips hue bridge linked to the TV, go to page Hue
bulbs .
Hue bulbs
In the following step, you will select the Philips Hue bulbs that
have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Amhue.
To select the bulbs for Amhue…
1 - In the Configure Amhue menu, select Hue bulbs and
press OK .
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press OK .
3 - When you’re done, select the OK button and press OK .
With the bulbs marked for Amhue, go to page
Configure bulb .
Configure bulb
In the following step, you will configure each Philips Hue bulb .
To configure each Hue bulb…
1 - Select the bulb name in the Configure Amhue menu
and press OK . The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight
colour to the bulb. Press  (up) or  (down) to adjust.
3 - Press  (right) to set the distance.
4 - Secondly, indicate the Distance between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Press
 (up) or  (down) to adjust.
5 - Press  (right) to set the brightness.
6 - Finally, set the Brightness of the bulb. Press  (up) or 
(down) to adjust.
7 - To stop configuring this bulb, select OK and press OK .
8 - In the Configure Amhue menu, you can select every
bulb and do the same.
9 - When all Amhue bulbs are configured, select
Finish
and press OK .
Amhue is ready for use.
You can always change the Amhue configuration later.
To change the configuration, press

and select
Setup
>
TV
settings > Ambilight > Amhue > Configure
Amhue.
Immersion
With Immersion , you can adjust the level of the Ambilight effect
for the Amhue bulbs.
To adjust the Amhue Immersion…
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Amhue >
Immersion and press OK .
3 - Press  (up) or  (down) to adjust.
4 - Press  , repeatedly if necessary, to close the menu.
Info
In View configuration , you can consult the current
Amhue configuration. Which network you use, how
many bulbs are connected, etc.
To view the current Amhue setup…
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Amhue > View
configuration and press OK .
3 - Select the item you want to view and press OK .
4 - Press , repeatedly if necessary, to close the menu.
73