Display User Manual
3D Solutions
23 September 2008
12 of 26
©2008 Philips Electronics Nederland B.V.
3
Scope of supply, Set up and mounting
3.1
Scope of Supply
The contents of the box:
o
Display 42-3D #
o
Table stand
o
3 Mains cords (USA, EU and UK)
o
DVI cable
o
CD ROM with:
Display Control Tool
3DS Media Player
User manuals
3D Sample content
2
o
Printed version of the Display user manual (this manual)
o
Cardboard box with cushions
The following items can be purchased separately:
o
Mounting bracket (Article code: 42-WM)
3.2
Image retention
IMPORTANT: Always display alternating content with your application. If a still image in high contrast
remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost image' on
the front of the screen. This is a well-known phenomenon, caused by the shortcomings inherent in the
LCD technology. Please note that the after-image symptom cannot be repaired and is not covered
under warranty.
3.3
Installation locations
o
Avoid exposure to excessive heat and extreme cold.
o
Do not store or use the product in locations exposed to excessive heat, direct sunlight or
extreme cold.
o
Avoid moving the product between locations with large temperature differences. Choose a
site that falls within the following temperature and humidity ranges.
•
Temperature: 0-35°C
•
Humidity: 20-80% RH
o
Do not subject the product to severe vibration or high impact conditions. Do not place the
product e.g. inside a car, car boot or trunk.
o
Take care not to mistreat this product by either hitting it or dropping it during operation or
transportation.
o
Do not store or use the product in locations where there is a high level of humidity or in
dusty environments. Do not allow water or other liquids to spill on or into the product.
2
More sample content can be downloaded from
http://www.wowvx.com
,
http://www.philips.com/3D
or the
Extranet at
http://www.philips.com/3dsolutions
(registration required).
