Philips 40PUG6909, Руководство пользователя

Страница: 21 / 78

7 - (Dot)
To enter digital sub-channels.
6.2
Keyboard
Overview
Overview of a keyboard.
1 - Character
Character position.
2 -  Shift
To type uppercase characters.
3 - Ω Special characters
To open the onscreen keyboard to select accented characters
or symbols.
4
-
Fn
key
To type a number or punctuation character.
5
-
 Spacebar
Enter a space.
6
-
Navigation
and
OK
Navigate through the menus, and confirm a selection.
7
-

Delete the character in front of the text cursor.
8 -

Share this
To share online what you are now watching.
Writing text
With the keyboard on the back of the remote control, you can
write text in any text field on screen. Turn the keyboard facing
upwards to activate the keyboard keys. Hold the remote control
with two hands and type with both thumbs.
Enter text
• To enter text into a text field, select the text field and start
typing. Press
OK to confirm the text.
Uppercase and lowercase
• To type an uppercase character, press the  (Shift) key just
before you type the character.
• To type several uppercase characters consecutively, press and
hold the
 key while typing.
• To type uppercase constantly, press the  key for 2 seconds
to switch the keyboard in uppercase mode.
• To switch out of uppercase mode, press the
 key again. If
no keys are pressed for 20 seconds, uppercase mode turns off
automatically. Also, if you press another modifier key, like
Fn or
Ω , you switch out of uppercase mode.
Numbers and punctuation characters
• To type a number or punctuation character, press the Fn key
just before you type the number or punctuation character you
need. You can turn the Fn mode on or off as you would for the
uppercase mode.
Internet
• You can use the Fn key to enter www. or .com .
Accented letters and symbols
Accented characters and symbols are not directly available on
the remote control keyboard.
To type such a character, you can open the onscreen keyboard.
To open the onscreen keyboard, press Ω . In the onscreen
keyboard, you can navigate to the character you need. Switch
the keyboard layout with the color keys. Press
OK
to enter a
character. The onscreen keyboard disappears when you press a
character on the remote control keyboard.
Alternatively, you can enter special characters with the remote
control SMS/text keypad on the front of the remote control.
6.3
IR sensor
The remote control of the TV uses RF (radio frequency) to send
its commands to the TV. With RF, you do not need to point the
remote control at the TV.
However, the TV can also receive commands from a remote
control that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point the remote
control at the infrared sensor on the front of the TV.
21