Philips 40PFT6550, Руководство пользователя

Страница: 66 / 142

21.3
Watch 3D
Start Watching 3D
When the TV switches to 3D or when a notification is
shown that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal
tag is missing), the 3D programme is shown as a
double image on screen. You have to switch on 3D
manually…
To switch on 3D manually…
1 - Press

, select 3D Format and press OK .
2 - Select the appropriate setting to get a correct 3D
picture. You can select 3D - Side by Side , 3D - Top
/ Bottom , 3D - Side by Side Inverted , or 3D - Top /
Bottom Inverted , then press OK .
To stop watching 3D…
1 - Press

, select 3D Format and press OK .
2 - Select 2D and press OK .
3D is also switched to 2D when you switch to another
channel or connected device.
Automatic Switching
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future. You can
change this setting in the Setup menu later.
• To switch to 3D automatically, select Automatic .
• To show a notification first, select Notification only .
• To never switch to 3D, select Never .
To change this setting…
1 - Press

, select All Settings and press OK .
2 - Select Picture and press

(right) to enter the
menu.
3 - Select 3D > Switch to 3D and
select Automatic , Notification Only or Never .
4 - Press

(left) repeatedly if necessary, to close
the menu.
Create 3D from 2D
With 2D to 3D Conversion, you can watch 3D all the
time. The TV creates 3D artificially from a 2D signal.
To watch 3D from a 2D signal…
1 - Press

, select 3D Format and press OK .
2 - Select 2D to 3D conversion , then press OK . Put
on your 3D glasses.
3 - Press

(left) repeatedly if necessary, to close
the menu.
To switch off 2D to 3D conversion...
1 - Press

.
2 - Select 3D Format > 2D , then press OK .
21.4
Optimal 3D Viewing
For an optimal 3D viewing experience, we
recommend that you:
• sit at least 3 times the height of the TV screen away
from the TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or
certain energy saving light bulbs which operate on a
low frequency) and direct sunlight as they may
interfere with the 3D experience.
21.5
Care of the 3D Glasses
• Do not use cleaning chemicals containing alcohol,
solvent, surfactant, or wax, benzene, thinner,
mosquito repellent or lubricant. Using these
chemicals can cause discoloration or cracks.
• Do not expose the 3D glasses to direct sunlight,
heat, fire or water. This may result in a product
malfunction or fire.
• Do not drop, bend or apply force to the lenses of
the 3D glasses.
• Use a clean soft cloth (microfiber or cotton flannel)
to clean the lenses to avoid scratching them. Never
spray cleaner directly onto the 3D glasses. This may
damage the electronics (for Active 3D glasses).
• Do not use cleaning chemicals containing alcohol,
solvent, surfactant, or wax, benzene, thinner,
mosquito repellent or lubricant. Using these
chemicals can cause discoloration or cracks.
21.6
Health Warning
• Watching 3D is not recommended for children under
the age of six.
• If you or your family have a history of epilepsy or
photosensitive seizures, consult a medical
professional before exposing yourself to flashing light
sources, rapid image sequences or 3D viewing.
• If you experience any discomfort, stop watching 3D
and do not immediately engage in any potentially
hazardous activity (for example driving a car) until
your symptoms have disappeared. If symptoms
persist, do not resume watching 3D without
consulting a medical professional first.
• To avoid discomfort such as dizziness, headache or
disorientation, we recommend not watching 3D for
extended periods of time.
• Do not use the 3D glasses for any purpose other
66