Philips 40PFT4111, Руководство пользователя

Страница: 31 / 56

11
Timers and clock
11.1
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Sleep timer .
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press

, repeatedly if necessary, to close the
menu.
11.2
Clock
To know what time it is, press

TV GUIDE to find
the time in the TV guide.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings >
Clock > Auto clock mode and select Country
dependent .
3. Select Daylight saving and select the appropriate
setting.
11.3
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic switch off.
To deactivate the Switch off timer . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Switch off
timer and set the slider bar to 0 (Off) .
3. Press

, repeatedly if necessary, to close the
menu.
31