Update channels
If satellite channels are already installed, you can update the
channel list with possible new channels from all installed satellites.
To update the satellite channels, press
h
>
Setup
>
Search for
satellite
. Select
Update channels
and press
OK
. The TV scans
the satellites for new channels and adds them to the list. Empty
channels are removed from the list. The update can take several
minutes per satellite. When the update has finished, the Channel
list for satellites is updated.
Signal reception test
With Signal reception test for satellites, you can check the signal
strength of a satellite or you can add a new satellite channel.
To start Signal reception test, press
h
>
Setup
>
Search for
satellite
. Select
Signal reception test
and press
OK
.
1
Select the
LNB
.
2
If you know the frequency of the transponder (which can hold
several channels), select
Frequency
and enter it.
3
Select
Search
and press
OK
.
4
If the TV finds a frequency and there is a store button shown,
a new transponder has been found.
5
Press
Store
to add the new transponder with its channel or
channels to the Channel list.
To add another transponder, select
Exit
and repeat the steps.
Troubleshooting
The TV cannot install the satellite I want
• Check the orientation of the dish antenna.
• Check the setting for the LNB that you use for this satellite.
• Check the connection type in the satellite installation settings.
• Reset all satellite settings if you lost track of the settings you
changed. Read
Help
>
Setup
>
Satellite channels
>
Installation
.
The reception of a satellite channel is poor
• Check the orientation of the dish antenna.
Sometimes the reception is poor
• Check if the dish antenna is solidly mounted. Strong winds can
move the dish.
• Snow and rain can degrade reception.
Read more about troubleshooting in
Help
>
Troubleshooting
.
Setup / Satellite channels
47
