Philips 40PFL5007K/12, Руководство пользователя

Страница: 56 / 71

EN 56
What you need
Warning: This TV complies with the EMC
directive only when you use a shielded
Cat5 Ethernet cable.

An ethernet cable

A computer network that includes:
a) A universal plug-and-play (UPnP)
router and
b) A computer with one of the
following operating systems: Microsoft
Windows XP, Microsoft Windows
Vista, Mac OS X or Linux.

To connect your TV to computers, you
also need media server software that is
set to share files with your TV. See
Use
your TV > View media (Page 19).

To connect your TV to the Internet,
you also need a high-speed connection
to the Internet.
Connect
You can connect this TV to your home
network through a wired or wireless
connection.

For a wired connection, see Connect
your TV > Network and the Internet
> Wired connection
(Page 56).

For a wireless connection, see Connect
your TV > Network and the Internet
> WiFi Integrated
(Page 56).
Wired connection
1. Switch on the router and switch on its
DHCP setting.
2. Connect the router with an Ethernet
cable to the TV.
3. Press , then select
[Setup] .
4. Select [Connect to network] , then press
OK .
5. Follow the onscreen instructions to install
the network.
6. Wait for the TV to find the network
connection.
7. If prompted, agree to the End User
Licence Agreement.
WiFi integrated
This section is only applicable for WiFi-
integrated TVs.
You can connect your TV to your home
network wirelessly. You can enjoy the best
of the Internet with Smart TV services, and
share content between your connected
devices with SimplyShare.
Note :
The wireless network operates in the same
2.4 GHz frequency spectrum as common
household devices, such as Dect phones,
microwave ovens or Bluetooth devices,
which can cause WiFi interference. Move
these devices away from the TV.

To reduce network traffic, switch off
unused network equipment in the
home network.

Reception quality depends on the
location of the wireless router and your
local Internet service provider.

When playing video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
Start wireless setup
1. Switch on your wireless network router.
2. Press on the TV remote control.
3. Select
[Setup] > [Connect to network] ,
and then press OK .
4. Follow the onscreen instructions.