4-1
PL12.3_DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
*1: TYPE A
*2: TYPE B
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal
Note
[1]
Stand
Assembly
D1 4(S-1)
---
[2]
Rear
Cabinet
D1
12(S-2), 4(S-3), (S-4),
(S-5), 10(L-1)
---
[3]
Digital Main
CBA Unit
D2
D5
4(S-6), CN3013
*1
,
CN3101
*1
, CN3701
*1
,
CN3601
*2
, CN3105
*2
,
CN3906
*2
,
Wireless Lan
Adaptor
*2
, CN3801,
Jack Holder
---
[4]
Power
Supply
CBA
D2
D5
6(S-7), CN401,
CN600, CL600
---
[5]
IR Sensor
CBA
D3
D5
CN4051, Shield Plate
---
[6]
Digital PCB
Holder
D3 4(S-8)
---
[7]
Power PCB
Holder
D3 6(S-9), Wire Holder
---
[8]
Speaker
D3 ---------------
---
[1] Stand
Assembly
[2] Rear Cabinet
[4] Power Supply
CBA
[8] Speaker
[9] Speaker
Holder(L,R)
[10] Stand
Bracket
[3] Digital Main
CBA Unit
[6] Digital
PCB Holder
[11] Function
CBA
[5] IR Sensor
CBA
[12] LCD Module
Assembly
[13] Front
Cabinet
[7] Power
PCB Holder
[9]
Speaker
Holder(L,R)
D3 2(S-10)
---
[10]
Stand
Bracket
D3
4(S-11), (S-12),
CL600
---
[11]
Function
CBA
D4
D5
Knob Frame, Function
Button
---
[12]
LCD
Module
Assembly
D4
8(S-13),
Panel Holder(L,R,T)
---
[13]
Front
Cabinet
D4 Corner Block
---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal
Note
