Philips 40PFK6550, Руководство пользователя

Страница: 65 / 146

21
3D
21.1
What You Need
This is an active 3D TV. On this TV, you can watch 3D
programmes and movies in full High Definition
resolution.
To watch 3D…
• tune to a TV channel that broadcasts programmes in
3D.
• rent a movie in 3D from an online video store.
• play a movie in 3D from a 3D Blu-ray Disc, a USB
device or computer.
Also, to watch 3D on this TV, you will need one of
these types of Philips Active 3D glasses. . .
• PTA507
• PTA508
• PTA509
• PTA517
• PTA518
• PTA519
• PTA529
All types are sold separately. Active 3D glasses from
other brands might not be supported.
21.2
3D Glasses
Overview
1 -

, On or Off switch, LED light
2 - Player 1/2 , Player 1 or Player 2 selection.
3 - Receiver lens
4 - Battery compartment
When you unpack the 3D glasses, also remove the
small plastic foil from the battery compartment.
Switch On and Off
To switch on the 3D glasses, press

.
The glasses need some seconds to adjust to the 3D
signal from the 3D transmitter on the TV. At first use,
this may take up to 15 seconds.
Battery Level
You can check the battery level when you switch on
the 3D glasses.
• If the LED light blinks green, you can use the glasses
for 4 hours or more.
• If the LED light blinks orange, you can use the
glasses for at least 2 hours but less than 4 hours.
• If the LED light blinks red, the battery is almost
empty and less than 2 hours of 3D watching remain.
Switch Off
To switch off the 3D glasses, press

. The LED light
blinks red 4 times. When the 3D glasses do not
receive 3D signals for 2 minutes, the glasses switch off
automatically.
3D Transmitter
Make sure the receiver lens in the centre of the
glasses can receive the 3D signals.
Also, clear objects away from the 3D transmitter on
the TV.
Split Screen Gaming
You can use these glasses to play split screen games.
Two players can watch the same TV but see two
different screens to play a game.
To switch the glasses to watch the Player 1 or Player 2
screen, switch on the glasses and then press
the
Player 1/2 key.
• If the LED light is orange and lits continuously for 2
seconds, the glasses are set for player 1.
• If the LED light is orange and blinks, the glasses are
set for player 2.
Replacing the Batteries
To replace the battery, press the small knob on the
battery lid and slide the lid up to open. Replace the
battery: type CR2032 (3V). Make sure the + side of the
battery is visible. Replace the lid and slide it down
until it clicks.
Warning
Danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent
type.
Danger
• Do not ingest the battery. Chemical burn hazard.
• This product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to
death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely,
stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or
65