3
Important Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampli
fi
ers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not
fi
t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.
Only use attachments / accessories speci
fi
ed by the
manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or
table speci
fi
ed by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart / apparatus combination to avoid
injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to quali
fi
ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, speci
fi
es that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC - National
Electric Code
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
ANTENNA LEAD IN WIRE
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
Wall Mount Bracket Kit
Brand:
PHILIPS
Model #
Screw dimension
40HFL4683S
SQM6435/17
M6 x 1.614” (41mm)
with spacer
•
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
•
For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.
•
P&F USA is not responsible for any damage to the
product or injury to yourself or others if you elect to
install the TV Wall Mount Bracket or mount the TV
onto the Bracket on your own.
•
The Wall Mount Bracket must be installed by experts.
P&F USA is not liable for these types of accidents or
injury noted below.
•
Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
•
Do not use screws that are longer or shorter than their
speci
fi
ed length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
•
Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading
to an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
•
Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or turned on. It may result in
an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8
inches (30cm)
Left and right side:
5.9
inches (15cm)
Bottom:
3.9
inches (10cm)
Содержание 40HFL4683S
Страница 1: ...Quick Start Setup Guide 40HFL4683S ...
Страница 11: ...11 ...