Philips 39PFL3830/V7, Руководство пользователя

Страница: 15 / 28

13 EN
4.10 Features Menu
•
[Back Light] :
4.11 Parental Menu
• [Child Lock]: Enter the password, then
1
Press
2 Select [Setup] > [Features]
then press
OK
3 Select one of the following settings.
then press OK.
.
The backlight value
can be varied . This function used to
adjust brightness level of panel.
1 Press
2 Select [Setup] > [Parental]
then press OK
3 Select one of the following settings.
then press OK.
[Child Lock Switch]: Make the child lock •
Note: Default password is “0000”
switch ON to lock the source/channel.
the following menus will open.
[Change Password]: Select this option •
to change the password.
..
[Channel Block]: Select the channels to
•
to be locked and press ‘2’ to lock or . . .
unlock the channels.
[Video Lock]: Select the sources
•
with up/down keys on remote and press
OK to set or clear lock.
Press to move, and press to adjust.
•
[Easy Link]: If you connect HDMI-CEC
This option is for updating the software.
[Software Update] :
•
[Reset]
: Reset to factory default settings.
compliant devices through HDMI,you
can control them at the same time with
your TV remote control.
Picture
Sound
Features
Installation
Child Lock
Parental
• [Clear All]: Reset the child lock
option to default value.
•
Picture
Sound
Features
Installation
Back Light
Energy Saving
EasyLink
Software Update
Reset
Parental
MHL Charge
MHL
ARC Note
EasyLink Applicable for only HDMI Source.
•
[ARC] : If you connect ARC enabled
Home Theater to TV, set ARC to ON
• [MHL] : To use MHL function set this to ON.
to listen sound through Home Theater
MHL is supported in HDMI 3.
ARC is supported in HDMI 4, If ARC is set to
On,ARC HT is connected then TV Speaker will
• [MHL ] Charge : To use MHL Charge function
set this to ON.
Be disabled.
[Energy Saving]:
power saving modes Off/low/Mid/ High/
Audio only Mode.
To save
the power consumed by TV, select
•
After selection of Low/Mid/high energy
saving indication displayed on energy
meter by pressing info key of remote control
Low: After selection of energy saving
option to “Low”, approx.5% of rated
power will get saved.
Mid: After selection of energy saving
option to “Mid”, approx.10% of rated
power will get saved.
High: After selection of energy saving
option to “High”, approx 25% of rated
power will get saved.
Audio only : After selection of energy
saving to “Audio only ” panel power
switched off & only audio come
from TV sets which results in
power saved of approx 35%
Note
Press any key ( except Find, Text, subtitle
Vol +/- and Mute) to exit 'Audio only' mode