English
13
Switching channels
To select Channels by using PROG.
▲
/
▼
or CH + /
−
•
Touch
PROG.
▲
(up) /
▼
(down)
on the control panel or press
CH + /
−
on the remote control.
To select Channels by using the NUMBER buttons
Analog/Cable TV operation
– When selecting cable or Analog channel 11
Note
•
To select the non-memorized channels, use
the NUMBER buttons.
•
No Signal
will appear on the TV screen after the subchannel broadcast is over.
Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press
SOURCE
repeatedly or use
▲▼
to select the input mode
you want, then press
OK
.
Media
PC
HDMI
ATV
AV
YPbPr
Input Source
O K
Enter
Favorite
You can easily locate a favorite channel.
1
Press
FAV
while watching a program to show the favorite channel
list.
2
Use
▲▼
to select the channel you want, then press
OK
.
1 TF1 HD
2 France 2 HD
6 M6HD
Favorite List
ATV
ATV
ATV
O K
Note
•
Use
CH + /
−
to move to the previous or next page.
•
You can set favorite channel at
Programme Edit
.
•
This unit need few seconds to memorise the favorite setting.
•
If you unplug the AC power cord immediately after the setting, It will not be registered
in the memory.
