- If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities,
set
Digital out format
to
Multichannel
. With
Multichannel
, the TV can send the compressed
multichannel sound signal from a TV channel or
connected player to the Home Theatre System.
- If you have a Home Theatre System without
multichannel sound processing, select
Stereo
.
Digital out levelling
(Home)
>
Settings
>
Sound
>
Advanced
>
Digital out levelling
Adjust the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
- Select
More
to have louder volume.
- Select
Less
to have softer volume.
Digital out delay
(Home)
>
Settings
>
Sound
>
Advanced
>
Digital out delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. Select
Off
if a sound delay is set on
your Home Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
(Home)
>
Settings
>
Sound
>
Advanced
>
Digital out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound.
You can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture.
You can set the value in steps of 5ms. Maximum
setting is 60ms.
Eco Settings
Set energy saving level
(Home)
>
Settings
>
Eco settings
>
Energy
saving
Select
Minimium
,
Medium
, or
Maximium
to have
different degress for energy saving, or select
Off
to
switch off energy saving mode.
Set screen off to save energy consumption
(Home)
>
Settings
>
Eco settings
>
Screen off
Select
Screen off
, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Set TV switch off timer
(Home)
>
Settings
>
Eco settings
>
Switch off
timer
.
Press the arrows
(up) or
(down) to adjust the
value. The value
0 (Off)
deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to
0
.
General Settings
Connection Related Settings
USB Hard Drive
(Home)
>
Settings
>
General settings
>
USB
Hard Drive
You need to set up and format a USB Hard Drive
before you record a channel.
CAM Operator Profile
(Home)
>
Settings
>
General settings
>
CAM
Operator Profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates.
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
the TV and the connected device.
Switch on EasyLink
(Home)
>
Settings
>
General
settings
>
EasyLink
>
EasyLink
>
On
.
42
