Philips 32PFL5578/V7, Руководство пользователя

Страница: 22 / 34

4.35 Use Philips EasyLink
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
If your HDMI-CEC compliant devices are
connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
•
Connect HDMI-CEC
compliant devices through HDMI
• Configure each HDMI-CEC compliant
device properly
• Switch on EasyLink
Note
• The EasyLink-compliant device mus t be
switched on and se lected as the sour ce.
•
Philips does not guar antee 100%
interoperability with all HDMI CEC devices.
4.36 Switch on or off EasyLink
When you play an HDMI-CEC compliant
device, the TV switches on from standby, and
switches to the correct source.
Note
•
If you do not intend to use Philips EasyLink ,
switch it off.
1 Press
2
Select
[Setup]
> [TV settings] >
[EasyLink] > [EasyLink] .
3 Select [On] or [Off ]
, then press OK
Note
• If EasyLink is OFF, all its submenus are
unavailable.
4.37 Switch the device ON or OFF
When an HDMI-CEC compliant device
is connected and TV switches to standby,
the device gets turned OFF automatically.
1 Press
2 Select [Setup] > [TV settings] >
[Auto Device OFF]
3
Select [On] or [Off ] , then press OK
[EasyLink]
>
features.
20 EN