Mechanical Instructions
EN 8
LC8.1U LA
4.
4.
Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Service Positions
4.3 Assy/Panel Removal ME8 Styling
4.4 Set Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassemble instructions in described order.
•
Please pay special attention to the speaker wires when re-
assembling the set. Place the cable tapes as shown in next
figures.
4.1
Cable Dressing
Figure 4-1 Cable dressing (32" models, ME8 styling)
CONNECTOR WITH
LOCK INSERTED
TO PSU
CONNECTOR
WITHOUT LOCK
INSERTED TO
PANEL
Speaker cable dressing: Pull cable taut
underneath SSB Plate before taping to
keep out of stand area
Inverter Cable
AC Mains Cable
Speaker and IR cable dressing: Tape to keep out of
speaker terminals
I_17741_009.eps
280408
Содержание 32PFL3403D/85
Страница 65: ...Circuit Diagrams and PWB Layouts 65 LC8 1U LA 7 Layout Small Signal Board Part 1 Bottom Side Part 1 ...
Страница 67: ...Circuit Diagrams and PWB Layouts 67 LC8 1U LA 7 Layout Small Signal Board Part 3 Bottom Side Part 3 ...
Страница 74: ...74 LC8 1U LA 7 Circuit Diagrams and PWB Layouts Personal Notes E_06532_013 eps 131004 ...
Страница 96: ...www s manuals com ...