Philips 32PFL3007, Руководство по обслуживанию

Страница: 13 / 66

Mechanical Instructions EN 13 TPM9.1AL LA 4.
2012-Jun-15
back to
div. table
4.3.6 Keyboard Control unit
1. Unplug the connector from the keyboard control panel.
2. Gently push inwards the two clips at the PSU side of the
unit. Release the unit at the PSU side and turn it away from
the PSU. Now push it towards the PSU to release the
catches at the other side of the unit.
When defective, replace the whole unit.
4.3.7 IR/LED Board
1. Gently release the clip that holds the board and take it out
from the bezel.
2. Unplug the connector from the IR/LED board.
When defective, replace the whole unit.
4.3.8 LCD Panel
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the speakers as described earlier.
4. Remove the keyboard control unit as described earlier.
5. Remove the IR/LED board as described earlier.
6. Remove all other metal parts that do not belong to the LCD
panel.
7. Release all fixing clips that secure the front bezel to the
LCD panel.
8. Lift the LCD Panel from the front bezel.
When defective, replace the whole unit.
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See
Figure 4-1 .
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.