Philips 32PFG5509/78, Руководство по обслуживанию

Страница: 13 / 98

Mechanical Instructions EN 13 TPM14.2L LA 4.
2014-Feb-28
back to
div. table
4.2 Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assembly/Panel Removal ( for
32"/40"/48"PxG5509/78)
Instructions below apply to the 32PHG5509/78, but will be
similar for other 32"/40"/48"PxG5509/78 models.
4.3.1 Rear Cover
Refer to Figure 4-7 for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2], [3] that secure the rear cover. Refer to
Figure 4-7 for details.
2. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-7 Rear cover removal
4.3.2 Keyboard Control Unit
Refer to Figure 4-8 for details.
1. Release the connector [2] from the keyboard control panel.
Caution: be careful, as these are very fragile connectors!
2. Remove all the fixation screws from the keyboard control
panel [1].
When defective, replace the whole unit.
19640_105.ep s
1
M4 × 10
Q 3 × 8
1 1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
1
3
M 3 × 4
3