Mechanical Instructions
4.
The aluminium stands (order code 3122 785 90480) can be
mounted with the back cover removed or still left on. So, the
stand can be used to store products or to do measurements. It
is also very suitable to perform duration tests without taking
much space, without having the risk of overheating, or the risk
of products falling. The stands can be mounted and removed
quick and easy with use of the delivered screws that can be
tightened and loosened manually without the use of tools. See
figure above.
Note:
Only use the delivered screws to mount the monitor to
the stands.
4.3
Assy/Panel Removal
4.3.1
Rear Cover
Warning:
Disconnect the mains power cord before you remove
the rear cover.
1.
Remove the screws that secure the rear cover.
2.
Lift the rear cover from the cabinet cautiously. Make sure
that wires and other internal components are not damaged
during cover removal.
4.3.2
Side I/O Panel
Figure 4-4 Side I/O panel
1.
Disconnect the cable (1) from the panel.
2.
Release the two fixation clamps (2) and lift the panel out of
the bracket.
4.3.3
LED Panel
Figure 4-5 LED panel
1.
Release the fixation clamp (1) and take the panel out of the
bracket.
2.
Disconnect the cable (2) from the panel.
4.3.4
Keyboard Control Panel
Figure 4-6 Keyboard control panel
1.
Remove the two fixation screws (1) from the bracket and
take out the panel/bracket combination.
2.
Remove the fixation tape (2) from the panel/bracket
combination.
3.
Release the three fixation clamps (3) and lift the panel out
of the bracket.
4.
Disconnect the cable (4) from the panel.
F_15390_046.eps
240505
1
2
F-15390_039.eps
280205
1
2
F_15390_049.eps
250505
1
1
4
3
2
2
3
3
