Philips 32HFL5332, Руководство пользователя

Страница: 23 / 48

21
En
gl
is
h
EN
Step 2 Search and store new TV
channels
1
Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes]
.
» The consumer menu appears.
2
Press to select [Installation] >
[Channel installation]
>
[Analog: manual
install] .
» The
[Analog: manual install]
menu
appears.
3
Press to select [Search] , then press
to enter.
4
Press Numeric buttons to manually enter
the three-digit frequency.
5
Press
OK
to begin search.
» If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
6
When the new channel appears, press
to return to the
[Analog: manual install]
menu.
7
Press to select
[Store as new
channel] , , then press to enter.
8
Select [Yes] , then press OK to store the
new channel.
9
Press MENU to exit.
Step 3 Fine-tune analog channels
1
Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes]
.
»
The consumer menu appears.
2
Press to select [Installation] >
[Channel installation]
>
[Analog: manual
install] .
» The
[Analog: manual install]
menu
appears.
3
Press to select [Fine tune] , then press
to enter.
4
Press to adjust frequency.
5
Press OK to confirm.
6
Press to select
[Store current
channel] to store channel number.
7
Press to enter
[Store current channel]
.
8
Select
[Yes]
, then press
OK
to store
current channel.
9
Press
MENU
to exit.
Skip channels
1
When watching TV, switch to the channel
that you want to skip.
2
Press
MENU > [PBS Settings] >
[Consumer Setup] > [Yes] .
» The consumer menu appears.
3
Press to select
[Installation]
>
[Channel installation] > [Analog: manual
install]
.
»
The [Analog: manual install] menu
appears.
4
Press to select
[Skip channel]
, then
press to enter.
5
Press to select [Yes] , then press OK
to skip current channel.
»
The selected channel is skipped when
you press
CH +/-
on your remote
control or view from the channel grid.
6
To skip more channels, repeat the
procedure.
Tip
• To access the skipped channels, press
Numeric
buttons .
• To restore a skipped channel, repeat steps 1
to 4, and then select [No] in step 5.