Mechanical Instructions
EN 13
LC4.9U AA
4.
4.3.11 PDP Glass Plate
In order to remove/exchange the PDP glass plate:
1.
Remove the PDP as described earlier.
2.
Remove the T10 screws [1] from the mounting frame.
3.
After removal of the frame, you can lift the glass plate from
the set.
Figure 4-17 Glass plate removal
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original positions. See Figure "Cable
dressing". Be careful with the fragile LVDS cable.
•
For a complete description of the Plasma panel, see the
LGE plasma panel Service Manual (12nc is listed on the
front page).
F_15400_119.eps
200505
1
