8
Connecting to the DMX512 Network
Installation & User’s Manual
300S Softlight LED Luminaires
4
.
Connecting to the DMX512 Network
DMX-512 network allow maximum of 32 units of
on a single segment of DMX-512 cables
300S Softlight
loop though in daisy - chain. A cable runs from the control console (or DMX512 control source) to the DMX
connector on the first
LED Luminaire. Another cable runs from the other DMX connector
300S Softlight
first unit to a DMX connector on the next
LED Luminaire.
300S Softlight
Figure 4 300S Softlight LED Luminaire DMX512 Input
Output Connections
:
/
Note
:
For more information on DMX512 networking and systems refer to
,
"
"
Additional Resources for DMX512 on
page 1.
DMX CONTROL on page 14.
"
"
For
LED Luminaire DMX Mapping refer to
,
300S Softlight
Figure 5 300S Softlight LED Luminaire
DMX512 Connections
:
-
Rear of Unit
DMX512(RDM) In
DMX512( RDM) THRU
300S Softlight LED Luminaires
DMX512 Connections
Note Remaining pins on each connector are not used
:
.
DMX512 Signal
XLR Pin
Common(Shield)
1
DMX512 -
2
3
DMX512
DMX512
(
out from first to
DMX512
(
out to the next luminaire
or DMX512 controlled device
)
(
from console or
control device
)
second luminaire
)
