Philips 2AANUBT50, Руководство пользователя

Страница: 11 / 14

9 EN
7 Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
No power
Recharge your speaker.
No sound
% Adjust volume on the connected device.
% When you listen to audio through
Bluetooth, make sure that no audio input
cable is connected to the
AUDIO IN
socket.
% Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
% Recharge the speaker.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
% The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
&)* +9:;<
pairing.
% Press and hold PAIRING for more than
three seconds, and then try again.
Cannot connect with the device.
% The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
% This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
% The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
% For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.